Nuevas Herramientas de COLOR en Premiere CC 2019

January 29, 2020

adobe premiere continues to improve its
color correction tool called lumetri, at the cc pressure 2019
has modified the curves tool in previous versions as
We could see in the video dedicated to the color of this series we had
a chromatic wheel with which we could modify the saturation of
certain colors the use of this tool was very easy the only thing
what had to be done was to move the line circular white towards the
inside if we wanted to remove saturation or to the outside if we wanted to bring it
you could make a selection of a certain color and modifications
saturation they would only be made to that particular
color so was the functioning of this chromatic wheel however in the
cc version of 2019 adobe I have removed it and has replaced it with five curves
independent that will make it easier fast and accurate the selection and
modification of a certain color in this video we will see carefully
each of the new curves that adobe premiere has included the cc version
2019 as well as the possibility of power work with layers something that is also
new in this version are you ready? let’s start the tutorial and to
help you to understand much better the tool variation curves
this version I will use the same example that I used in the video how
modify color in premiere color grading in that video we saw how to use the
Curved tool using the wheel chromatic in this we will see how to use it in
the cc 2019 version with the 5 new curves for it we select the clip
in the timeline and we activate the color workspace by pressing the
button located on top of the program our plane has already gone through
the color correction phase and it’s perfectly exposed as you can
check on the measuring instrument RGB Parade and in the histogram in the
vectors we can check that no has dominance of color and that the
saturation is within limits in the lumetri control panel we have
the controls needed to perform the color grading and between them is
the curved option that is the one that contains the new tools is divided into
two parts a first with the curves RGB
carefully in the video dedicated to the grading of this series and a second
part called hue curves saturation that we will see one by one in this video in
total are five curves and each one has a function know that modifies each one
it’s very easy so you just have to look at its name in the curve tone and saturation
we choose the tone and modify its saturation in the tone and tone curve
we choose a tone and modify its tone in the curve tone and luminance we choose
a tone and we modify the luminance in the next we modify the saturation
of the luminance and in the last we modify the saturation of the
saturation in all the curves we’re going to have a dropper that will help us
choose the quality of the color that we want to modify in an exact way
since we can select it directly in the program panel we go
to start with the first tone curve and saturation in it we choose a tone and you
we modify the saturation I will select the dropper and I’ll choose the
green color of this bus once selected items appear three points in the
line the one on the left and the right single
they limit me the selected color if we press the center point appears
a vertical line that already tells us what what are we going to achieve if we move the
point up or down if what we take it up we get more
saturation only in plane tones that match what we have
selected if we take the point central down we eliminate
saturation to the chosen tone throughout moment we can move also in
the color range that has limited us to the selection we made with the
dropper what will not allow us in no time is it that we do not leave
said limitation to undo the correction is as easy as double
click above the horizontal line and as you see all our adjustment is reset
notice that the horizontal line begins with the color red and ends also with
the color red if we choose a red tone for example the one on this bus these
will be the limit points and the point for move and change the saturation would be this
from here we undo and let’s see below
the curve tone and tone this curve is going to allow to select a tone of the plane and
change it for another different tone if we select a color with the
dropper than to continue with the same example I will choose the same bus if
now we select the central point the vertical line shows us all the
different tonalities modifying what we can change the color tone that
we have chosen curve tone and luminance this curve us
will allow you to select a tone from plane and change the luminance of the tone
selected we choose the tone of the bus and if we select the point
central the vertical line will show us the luminance range of the chosen tone
if we move it up we increase luminance and if
we scroll down the decrease curve luminance and saturation this curve
will allow us to modify the saturation of image brightness and
we will be able to select if we want modify it in the whole plane by
complete or modify the brightness in shades midtones or highlights
let’s see how this curve works we select the horizontal line and the
we go up we increase the duration to all the flat completely and if we lower it
we decrease the saturation in all the evenly this curve is read from
left to right the left represents the shadow and the right the
high lights that is let’s go from the black to the white therefore if we want to increase
the saturation in the area of ​​the lights we increase the right area of ​​the curve and
As you can see, we retrieve information from sky and the tones that were most
burned in the image if we decrease the point on the left we will go down
saturation in the darkest areas we can go playing with this curve until
find the result that we like the most finally the curve saturation and
saturation this curve is also read from left to right in this case the
less saturated areas are at left and the most saturated to the
right I’m going to change the image because with the balloons you will understand a lot
better its use at a glance we can see that there are balloons that are much more
saturated because in this shot you It gives less sunlight if we wanted
eliminate saturation only from more saturated balloons leaving the rest of
the image as it is would create two points in the saturation line
the first point corresponds to the less saturated colors since it is at
left and this other point would correspond to the most colors
saturated since it is on the right to eliminate saturation of the most areas
saturated that in this example would be these balloons down the point located at
the right and as you see it balances the saturation of the image if we do not increase
we would add more saturation to the colors more saturated
another adjustment would be to increase the saturation of the least saturated colors in this
case we would increase the point created to the left of the curve and as you see increases
only in the least saturated zone this would be the operation of the five
new curves that premiere has included in its version cc 2019 let’s see now
the possibility that we have to work with layers in the correction processes
when we apply a color correction any the created effect appears in
the panel controls effect with the color name of lumetri in this
effect is collected all the variations that we have created
we can activate and deactivate it by clicking on the effect button if
we deploy we get all the values that we have varied in the color panel of lumetri, if you look at the panel color of lumetri on top
the effect appears but now has a drop-down this drop-down is going to
allow to add a new effect of color change the name and erase it
what is the use of this new option that gives us premiere helps us to work
with layers in lumetri for you to understand better I’ll make an example we have
this plane of this girl who listens music lying on the grass I’m going to
perform a color correction remember that what I’m going to do to
then I explain it in the video dedicated to color correction for
start the tool length of wave where we see the luminance tells us
that you lack black so I’m going to select correction colors
basic and I will lower values ​​in the shadow once adjusted I will also lower it
black values ​​until it reaches the zero value of the instrument we already have the
Adjusted luminance the vector is copied does not indicate that the
image is saturated as it protrudes from the limits so I’m going to lower it
saturation using the slider of the saturation more or less around here if you look at the tool
RGB exhibition parade you should add a little blue
we have leveled blue and red we would need to level the green that is
a tad higher we selected the staining slider and we lowered a bit the
green color of this form is the image completely adjusted according to
measurement instruments if we activate and we deactivate the correction we can see
the change this would be the first step of all the
correction below we could create a color or gradation setting
to give you a specific look before you did everything about the same effect but
Now we can separate it once created this correction let’s give it a name
for that we go to the drop-down we select the effect that in this case
we only have one and we click on change name in the window change the
element name I’m going to call it color correction and we press to accept
next I will create another effect click on the drop-down and
we select to add the effect of color of lumetri and we are created one at
which I will call grading with the selected color effect I will
work now the color to not do the more extensive tutorial I’ll go to how easy
and I’m going to apply a creative style of those that premier puts at my disposal
for example one that is well noticed in the change as is the cinema space
I’m going to lower the intensity a bit and we would have this result
if we now go to the panel controls effect we see that we have the two effects
that we have created and we can go selecting each part of the process
correction separately we can even disable for example the effect of
grading and create a different one by black and white illustration. in this way we can choose in the
Effect controls panel which of all we like it better for our final video well I hope as always that this video
about the new curves tool adobe premier has been helpful
it has been like this do not forget to leave a like and as I always tell you I would love
can read your greeting or your comment about the video subscribe to the channel if you
like its content and share it with more people so they can join this
adventure a hug and see you in the next video

No Comments

Leave a Reply