Articles, Blog

MIND-BLOWING Perspective-Bending Effect in Photoshop [EASY Photo Manipulation Tutorial]

September 11, 2019


In this video, I’m going to show you how to
create a perspective-bending effect in Photoshop. Hi, Jesus Ramirez here from the Photoshop Training Channel. In this video, I’m going to show you how to
create a cube earth. This is an effect very similar to what you
would see in the movie Dr. Strange or Inception. This is going to be a really easy effect to
recreate, and no matter your skill level you should be able to follow along. Okay, let’s get started. So, we’re going to work with this document
here. This document contains two layers and full
disclosure this is the original file. I wasn’t too happy with the sky, so I did
a sky replacement. We’re going to work with the sky replacement,
but I just wanted to show you that the original file had a different sky. Also, you can use whatever landscape photo
you have to follow along, or you can download a watermark version of this photo from Adobe
Stock. There’s a link to it in the description. I’m not going to spend any time doing sky
replacements in this video because I really want to get into the actual cube effect that
we’re trying to recreate. But if you’re interested in learning how
to do sky replacements, I have a 90-second video that I really think you will enjoy. It uses blend if to replace skies really easy. So, check out the link, it’s going to be down
below in the description. Okay, since we’re not using this layer,
I’m just going to delete it and just work with this layer. And the first thing that we’re going to
do is right click on the layer, and convert it into a smart object. Now, this step is not necessary, you can do
it without a smart object, but I think that it helps later on. So, you can do it without a smart object,
but you’ll see why this becomes helpful. Then I’m going to duplicate the smart object,
but be very careful how you duplicate the smart object. If you simply duplicate it by pressing Ctrl
J or dragging it into the new layer icon, then you’re going to create a smart object
that is linked to the original. So if you make a change to one, that change
will be applied to the second. I don’t want that, I want two smart objects
of the same thing, but I don’t want them to link. So, to create a duplicate of a smart object
without being it being linked, you can right click on the layer, and select new smart object
via copy. So they’re both the same, but they’re
not linked. I’m going to press Ctrl T, Command T to transform
right click and select flip horizontal, then right click and select rotate 90 degrees clockwise. I’m going to click and drag that rotated layer
and place the bottom left corner on the bottom left corner of the canvas. Then I’m going to zoom out; then I’m going
to hit enter, return in the Mac to commit the changes. And I’m going to select the Polygonal Lasso
tool, and I’m going to make a selection from the bottom corner of the canvas to the top
corner of that layer. So, I’m going to disable the background
so that you could see it. So, I’m going to click here and drag up
here, so to the top right corner where the transparency starts and just make a loose
selection in the outside. So, now I have a selection on the top left
corner of this layer, so this is really, really important. Then I’m going to enable the background layers
so that you can see the magic. With this top layer select and I’ll just call
this top layer side because it’s going to be the side of our cube, and this one will
be the top part of our cube, so, I’ll call it top. So, with the side layer selected, I’m going
to click on the Layer Mask icon and just watch the magic happen. Right away we create sort of the effect that
we’re going for, so this could be a different effect that you can apply but is sort of the
opposite of what we want. We want it to be the other way around, we
want it to go down not up, but you can use this technique to create an effect where the
side of the cube is going up instead of down, in this case, it really wouldn’t be a cube,
It’s more of a wall. But anyway if we want that face to go down,
we simply need to select this Layer Mask and in the properties panel click on invert and
notice what happens. Now it looks like that face is going down
instead of up, so this technique should work on all photos, let me know in the comments
if it was new to you. The next step is to unlink the Layer Mask
from the layer. So notice how when I click on each individual
thumbnail the focus changes, the focus is that white outline around it. So make sure that the focus is on the Layer
Mask, and we’re going to click on this chain link icon to remove it. So now the Layer Mask is no longer linked
to a layer that means that we can move them independently of each other, and that’s what
we want to do. So with that Layer Mask selected I’m going
to click on the move tool, and I’m going to click and drag that Layer Mask to the right
while holding Shift so that I can’t move it up and down I can just move it left to
right. And I’m just going to place it right about
here, on your image you will have to experiment to see what looks better. It all depends on the contents of your photo,
but no matter where you place the mask you will have the same problem, which is the visible
pixels on the right. So I’m going to click on the rectangular marquee
tool and make a selection around those pixels. Black is my foreground color, so if I select
the Layer Mask and press Alt and Backspace that fails but the foreground color and it
hides those pixels from the Layer Mask. If I enable the top layer, the top face of
the cube you can see what that looks like now. I’m going to press Ctrl D Command D to de-select,
I’m going to double-click on the hand tool to fit the image to screen. Now I’m going to click on the layer thumbnail. Click on the move tool, click and drag that
to the right. and what I really need to do at this point
is to find something in my image that is recognizable. So, look at your image and look for something
that is recognizable, so in my case, this red truck and I mean recognizable close to
the edge ideally. So, this truck is close to the edge, so I
need to find that same truck on the other image So, I’m just going to click and drag till
I find that truck and maybe I already went past it, no I haven’t yet so let me find it,
there it is it’s right here, so find something recognizable. I’m going to zoom in, and I’m going to try
to place it into position, and you can use the up and down arrow keys on the keyboard
so you can move the layer up down left right. So right about there, that looks right I’m
going to double-click on the hand tool to zoom out and just make sure that everything
looks right. And that looks pretty good already what do
you think? So, what we’ve got to do now is work on the
lighting because in the real world each face will have different light, so we need to change
that in the composite. So what I’m going to do is double-click to
the side of the layer and click on Gradient Overlay. then I’m going to click on this drop down
and select the second option, which is foreground color to transparent. The foreground color is black, which is what
we want. And now I can bring the scale down to 10,
and I’m going to try to match this line to the angle of the cube. And I can do so by simply putting my cursor
inside of that input box and using the up arrow to rotate it accordingly. So, find the right angle for your shadow,
tap on the up and down arrow keys until you get it right about there, then I can increase
the scale, and I can click and drag to place it into position better. So, that looks pretty good I think, maybe
I need to rotate it a little more the other direction, something like that and press okay. Now obviously we have a big problem here this
very sharp line. So, what I’m going to do is I’m going to teach
you a trick where you can separate the Layer Style from the layer, and you can control
it independently, you can even add a mask. And you can do so by right-clicking on the
FX icon and selecting “Create Layer.” This removes the Layer Style, but it creates
this new layer with that effect. So now you can simply apply a Layer Mask to
that. I’m going to hold Alt, that’s Option on the
Mac as I create the Layer Mask to create an inverted mask. So that’s going to hide everything that layer,
notice how it’s black now. And I can simply paint on that Layer Mask
with white to bring back that effect. And then I can paint with black to hide it,
and I’m going to make a smaller brush Hold Shift, click-and-drag down to make a
straight line. So, when you hold Shift, you can make straight
lines when you’re painting. And I’m going to bring down the opacity accordingly,
maybe something like that, before and after. Now the problem now is that we actually have
a really sharp line, so I’m actually going to bring that up so you can see the problem. So I’m going to zoom in and notice that we
have a very sharp line and I don’t really like that I want a smoother line. I’m going to go into the Layer Mask, and it’s
controlling the side of the cube, and I’m just going to smooth it that way around the
bevel. So, to do that just simply select the Layer
Mask and then increase the feather on the properties panel, so notice how that removes
that sharp line and I think that looks much better. I’m going to fit the image to screen, and
I’m going to bring the opacity to this layer to 50%. So what we’re going to do now is add a highlight
to that edge just to make it more realistic, so I’m going to click under the side layer
and create a new layer. And I’m simply going to paint with white I’m
using a soft brush, and maybe I’ll make it smaller by using the left bracket key on the
keyboard. And I click once hold Shift and click on the
other side, and that creates a straight line like so. I can reduce the opacity and maybe even change
the blend mode to something like overlay and reduce the opacity even further. So now we have sort of that nice highlight
there at the edge. And by the way, if I’m going too fast in some
of these parts remember that you can always pause and rewind the video. All right, so now this is looking pretty good
I’m going to zoom in, and you can see that this is looking much, much better. And I think I might have gone over the edge
there so let me create a Layer Mask and paint with black just to hide that there. So, what I’m going to do now is just work
on some details, so look at what I’m doing and see how you can apply these techniques
to your image. The first thing that I’m going to do is zoom
in, and we’re going to work with this red truck. Because obviously if cars are going down the
road then they would get into a car crash, and you don’t want that. So, we don’t want any car accidents. So what we need to do is we need to remove
or clone out this truck, which is why I asked you to create a smart object. If I double-click on this smart object it
opens up in a brand new tab, and we can work on it, so now I can create a new layer, zoom
in and there’s that red truck. I can select a clone tool, reduce the size
of the brush, hold Alt, Option on the Mac and click to sample from that area, and I
can simply clone out the truck. And I’m not going to spend too much time and
make sure that I get it 100% right because this is just a tutorial, but in your own images
do spend the time to get it right. So, I’m going to save by pressing Ctrl S. Command S on the Mac and that truck is now
gone. So, you need to go into your image and find
issues like that and just clone them out. Also, another issue with cars is that they’re
facing the wrong way, so if we want to add cars that are facing the right way we need
to copy them from another area. So, we’ll work with these cars here so you
can see what I mean by that. I want to double-click on that smart object
again, and I’m going to find that same spot, which is right over here, this area here. So what I need to do first is clone out these
cars, so let me clone them out really quick. And again this is not going to be the best
cloning job you’ve ever seen, but it’s going to illustrate my point, there we go. So, now those cars are gone, if I press Ctrl
S, Command S on the Mac to save you will see that those cars are now gone from here. Now I want to make it seem as if cars are
going down this road not up. So, what I need to do is I need to take cars
from this side of the road and clone them on to the other side of the road. So, I’m going to create a new layer, and I’m
just going to clone that car on to this side like so. And then I can create a Layer Mask, paint
with black in areas where it doesn’t quite match, then I can press Ctrl S, Command S
on the Mac to save. Go back into my composition, and now you will
see a truck going down the road not up. I’m not going to take the time to clone out
all the other cars because it’s the same process over and over again. And that’s where I spent a lot of the time
in my composite. I spent a lot of time working on those finer
details, so you need to do that. We’re going to finalize the tutorial by creating
that main road that goes off screen. So, to create that we’re going to work with
the original layer. So, first I’m going to select all the other
layers and press Ctrl G, Command G on the Mac to put that into a group. And I’m going to call this side because that’s
the side of the cube and we’re always working that nondestructively. So, now I’m going to show you this really
cool technique to make it seem as if the road is coming right at you. And it’s really simple all you need to do
is select the background, which is that top face, the bottom-most layer. Go into the Polygonal Lasso tool and simply
make a selection around the road and I’m going to hide the top group so that we can see it
better. I’m just going to loosely follow the edge
like so. And I’m clicking to set the point of that
selection, and when I come into the other side. I can close that selection, and it’ll select
the road. Then I can press Ctrl J, that’s Command J
on the Mac to duplicate. You can remember that keyboard shortcut by
thinking of jumping a layer, so it jumps up to a new layer. So, we have that road in a single layer as
you can see there. Then I’m going to convert this layer into
a smart object so that I can transform it nondestructively. Or rename the layer overpass , and I’m going
to press Ctrl T Command T on the Mac to transform, and I’m going to zoom in so that you could
see. We have this little pivot point here that
I can click and drag or I can hold Alt Option on the mac and click to place the pivot point
in that spot. So, I’m going to place it right in the center
of the street; then I’m going to zoom out, I’m going to right-click on that layer and
select perspective. And I’m simply going to click on one of the
corner handles and drag outward like so, so that makes it seem as if the road is coming
right up at us. Then I’m going to right-click and select warp,
and I’m going to use these handles to warp the road in so that it’s thinner at the bottom. And that helps create the illusion of the
road coming up. And I’m just going to click and drag this
point outward like so. Then I’m going to right-click and select distort;
I’m going to click on this middle handle and just drag it out just a little bit like so. Then I’m going to hit enter, and we have created
the overpass. What I’m going to show you now is a really
cool technique of creating shadows in Photoshop especially when you’re compositing. So, what I’m going to do is I’m going to click
on the top layer, then I’m going to create an exposure adjustment layer, and I’m going
to decrease the exposure, so right about there. Then with the Layer Mask active I’m going
to click on the invert button in the properties panel so black hides, so we’re hiding the
effect. Now I can come into the brush tool and paint
with a small soft brush with white, because white reveals, and that is my shadow right
there, and I’m just painting that shadow in. And we can adjust the shadow by adjusting
the exposure. What I need to do now is drag the overpass
layer above the side group. And I need to do the same for the exposure
adjustment layer, which is the shadow. And at this point, all that you need to do
is work on the fine details of your composite to take it to the next level. Let me know in the comments, which of the
techniques that I showed in this tutorial was your favorite, also if this is your first
time at the Photoshop Training Channel don’t forget to subscribe. If you decide to create something using this
tutorial please share it and post the link down below or share it on Instagram with the
hashtag #ptcvids. Thank you so much for watching, and I will
talk to you again very soon.

100 Comments

  • Reply DMSG1981 April 29, 2018 at 12:39 pm

    Thanks you, Jesús! But how do you make the stamp tool sample all underlying layers @12:30 ? For me it samples only from the focussed layer which is completely transparent, so I cannot clone any cars into a separate layer.

  • Reply ricardo oliveira April 30, 2018 at 2:49 pm

    SENSACIONAL – RICARDO DO BRASIL

  • Reply salah ouali April 30, 2018 at 9:16 pm

    None so amazing as what you have displayed. Really fantastic.

  • Reply sabbir hossain May 4, 2018 at 8:52 pm

    Please give me the version ps6. I have a software ps6. But many tool are messing. I want to work professional as like you. So please tell me what to do?

  • Reply sabbir hossain May 4, 2018 at 8:53 pm

    And seriously i'm your big fan

  • Reply Bamidele Karimu May 10, 2018 at 1:50 pm

    It's got to be you to break this down for us to understand. Great one again. Cheers.

  • Reply Martin May 12, 2018 at 5:03 am

    Amazing. Love watching you work man!

  • Reply Kazuun May 12, 2018 at 10:33 pm

    Am I the only one disappointed that the side going 'downwards' is a mirror of the left side of the picture? Would look way more natural if it would be the original right site going down. Eliminates the need for fixing the cars and their directions.

    Other than that, great job.

  • Reply Flores Tista May 13, 2018 at 2:27 am

    Podrías hacerlo n Español porfavor

  • Reply Naresh Ugaonkar May 29, 2018 at 6:00 pm

    I appreciate the efforts that you are taking and sharing the invaluable knowledge with everyone. And because of that i am going to turn off my ad blocker on my desktop Everytime i am going to watch any of your videos. Thank you so much for the great content.

  • Reply CruXial June 2, 2018 at 3:53 pm

    Out of all these amazing things you did the road perspective blew my mind for some reason. lol
    Great tutorial! 😀

  • Reply Gladson Jacob June 3, 2018 at 2:58 pm

    Super…

  • Reply Fredwreck June 4, 2018 at 5:38 am

    Great tutorial

  • Reply Sam Jaded June 5, 2018 at 12:48 pm

    Hi, what exactly has to be considered at around 5:07 while moving the mask??

  • Reply zeineb abdallah June 8, 2018 at 3:51 am

    Thanks so much your channel is wonderful 😻

  • Reply Project Diva Player June 8, 2018 at 2:03 pm

    It like no tears left to cry MV

  • Reply Aaron Smith June 8, 2018 at 4:46 pm

    Minecraft!

  • Reply JELA June 8, 2018 at 6:21 pm

    You are so generous with your information. You taught so many techniques in just one video! Thank you!

  • Reply Vic HN June 9, 2018 at 1:00 pm

    the best channel on pshop tutorial! it's because you really share every bits needed, not just the main topic of your tutorial. top notch tutorial!

  • Reply Vinayak S Nair June 12, 2018 at 5:55 pm

    Its Useful ………….. Thank You……………

  • Reply Jothi Narayanan June 21, 2018 at 12:36 pm

    what version?????

  • Reply sanket mane June 21, 2018 at 6:41 pm

    That's cool

  • Reply Joel Yocca June 22, 2018 at 3:13 am

    Mind blown

  • Reply Marta Barejko June 26, 2018 at 6:28 pm

    great tutorial! thank you!

  • Reply nizhal roson June 27, 2018 at 6:49 pm

    awesome brother . all the best and thank you

  • Reply Nwachukwu Eche June 29, 2018 at 7:07 am

    Wonderful tutorial…. My best technique which has always been an issue was the "new smart object via copy" never knew that was what it did…… Thank a lot

  • Reply PT-Creations June 29, 2018 at 12:27 pm

    Hello Jésus, great tutorial as always! A tiny question though: at the end of the tutorial you are hand painting a shadow for the road coming towards the viewer. I think you might need to adapt the shadow where it hovers over the 'flipped' part of the earth. This shadow is only working if the world isn't a cube. What do you think? Anyway, thanks again!

  • Reply Jonnhy StarK June 30, 2018 at 4:24 am

    no entiendo ni madres solo estoy esperando lo hagas aun asi me suscribo saludos desde mexico

  • Reply Taimen Record July 4, 2018 at 4:45 am

    I found that editing the image with a landscape mode is much easier than the portrait. btw, thanks for the video. very helpful.

  • Reply Jami Pool July 9, 2018 at 11:39 pm

    This is cool, but I am frustrated as I have been at this all day. I am getting stuck when it is time to match when moving the mask. Part of it will match but not the rest. Are you using a certain size photo? Appreciate the help!

  • Reply Spoofle July 16, 2018 at 10:15 pm

    I don't use Photoshop since 15 years and i need to learn the new tools. So, I thank you very much for helping me to buy some time. Very impressed, and you're really cool. See you soon.

  • Reply Andriy Trofymenko July 17, 2018 at 6:25 am

    One of the best tutorials. Thanks

  • Reply Animation Blaster July 21, 2018 at 12:02 pm

    How to use Polar Coordinates- https://youtu.be/BzLNPuaUwKY

  • Reply Hankerson Photography & Video August 2, 2018 at 11:28 am

    That was awesome man. Good job.

  • Reply Jon Marks August 12, 2018 at 10:01 am

    Brilliant video – but I have one problem. When I open the Properties panel, Invert is greyed out and not available. What have I done wrong?

  • Reply David Drejer August 13, 2018 at 1:45 pm

    I just made a Great Picture using this Tutorial check it at my Insta
    👉👉👉 https://www.instagram.com/ddrejers/

  • Reply Jan Beard August 14, 2018 at 7:33 am

    So much knowledge! I do wonder if the road that is vertical that was part of the angled road before you brought the horizontal part forward, could be somehow erased back to its junction to seem as if the junction was never there, for in my opinion, it seems cut off. Thanks for showing this complex imagery.

  • Reply Jaye lady August 16, 2018 at 3:04 am

    I really like your video. May you create a video about 3D Spherical Panoramas?

  • Reply Kikko Ciapponi August 16, 2018 at 10:47 pm

    U r soo cool dude, thanx!

  • Reply Blind Design August 17, 2018 at 1:22 pm

    This is a really cool effect

  • Reply Hecham Ghost August 26, 2018 at 11:00 pm

    Awsm effect ☺

  • Reply Rob Fielding August 28, 2018 at 4:19 pm

    Great informative tutorial. Being a MANCHESTER CITY fan I didn't realise Sergio Aguero knew all this stuff about photoshop.

  • Reply Abas iSTUDiO August 29, 2018 at 4:15 pm

    Amazing thank you!

  • Reply ابو العلاء الحضرمي September 3, 2018 at 9:44 pm

    Thanks I really need this tutorial

  • Reply Scott DeMyers September 5, 2018 at 9:22 pm

    the smart object via copy!!!!!!!!!!!!!! thank you

  • Reply Ramonia Deco September 6, 2018 at 11:56 am

    Thank you!!!!

  • Reply Rick M. September 10, 2018 at 4:44 pm

    Excellent tutorial! And, done with voice… and not damn music which is so irritating!

  • Reply Marmee Cruz September 15, 2018 at 2:40 pm

    Simply "MAGIC!"

  • Reply Byung Gweon kim September 17, 2018 at 2:10 am

    You Great..!!
    Thank u…!!

  • Reply Martyn Tallon September 17, 2018 at 10:55 am

    Brilliant tutorial! I don't know why, but when you said "Return on the mac", it made me think of Return Of The Mack 😀

  • Reply luis guzman September 19, 2018 at 8:24 pm

    Would it work on a photo that has equal sizes? like a 12×12?

  • Reply Ihab M September 22, 2018 at 4:37 pm

    Pretty cool!

  • Reply Alcivan Gama September 24, 2018 at 6:50 pm

    Absolutamente incrível. Parabéns.

  • Reply Thanos September 26, 2018 at 3:13 pm

    10:14 "Oh look, this line is 0,2 centimeters longer than it should be….. LEt mE CreATE A laYEr MAsk AnD PaiNt witH BlaCK tO HidE iT!!!"

  • Reply Meltdown September 28, 2018 at 11:27 am

    When I hit Alt+Backspace, it just fills the selection with the image instead of removing the pixels. Help?

  • Reply ST0RM October 2, 2018 at 11:13 pm

    You Are Amazing!!!

  • Reply Apit Blinken October 4, 2018 at 9:05 am

    can i get the image without watermark pls…

  • Reply Michael Gilchrist October 8, 2018 at 8:09 pm

    Excellent!

  • Reply Faisal Ahmed October 8, 2018 at 8:10 pm

    Splendid 👌🏻👌🏻👌🏻

  • Reply Frank Samet October 10, 2018 at 2:28 pm

    Thank you, I got this working on Elements 2018 and am very pleased both with the results and how easy it was to do.

  • Reply Akash Ingke October 10, 2018 at 5:26 pm

    1 ch number,… ekdm kdk

  • Reply Augis October 14, 2018 at 7:49 am

    The camera man is pointing a gun at him

  • Reply Ricky Garcia October 20, 2018 at 1:54 am

    that click shit for brush tool! wheeew!

  • Reply The Creative Arts October 25, 2018 at 7:51 am

    Great job & good work sir

  • Reply mmromanc October 29, 2018 at 4:52 pm

    Awesome!!! Thanks Jesus!

  • Reply Jarod R. October 29, 2018 at 7:17 pm

    Extremely useful tutorial J.R, thanks for sharing!

  • Reply A.elrahman Design November 1, 2018 at 8:45 am

    awesome

  • Reply King Kas November 1, 2018 at 12:20 pm

    I like all your videos thanks

  • Reply miu ngố November 7, 2018 at 2:36 pm

    stock please

  • Reply Dwargh November 8, 2018 at 7:55 am

    Whoa 😮😀👍🏼 I will try this at home tonite!😜 thank you very much!😃

  • Reply scs3drg November 9, 2018 at 5:28 pm

    One of the best training videos I've seen, so clear, loads of information and tips.

  • Reply Horace jones December 9, 2018 at 10:11 pm

    Just an amazing tutorial!!

  • Reply Mudskipper NQ December 24, 2018 at 3:53 am

    Thank you so much! I had great fun following your tutorial and I think I did an alright job for my first attempt! Now I'm inspired to play some more!

  • Reply Sujood Boulad December 28, 2018 at 11:59 pm

    Thank you very much.. I have tried this, but I have a problem that is when I move the top to match it with the side it's matched on the top right but at the bottom it's not and if I try to match the top right it gets unmatched at the bottom left so how I fix this problem if you unduerstood the issue?

  • Reply Neetu JJ January 3, 2019 at 4:02 am

    Amazing 👍🏼

  • Reply Paul Tomlin January 18, 2019 at 4:29 am

    So many great tips in one tutorial! Packed with info!

  • Reply AAG February 3, 2019 at 6:50 am

    Thanks.

  • Reply Andres F Valencia Franco February 6, 2019 at 6:35 pm

    Amazing, thank you so much for tutorial!!!

  • Reply Arvydas Gus February 16, 2019 at 1:32 pm

    This proves that earth is a cube, thank you!

  • Reply Eli Farahbakhsh February 20, 2019 at 1:01 pm

    THANK YOU

  • Reply Jessie Camano February 21, 2019 at 10:01 am

    your tutorial is very fascinating,, i like all your video and i give you a lot of likes… thanks..

  • Reply Weak Shadows February 25, 2019 at 6:23 pm

    Thank you for this lesson.. You are my hero 🙂

  • Reply Daniela Argandoña March 5, 2019 at 3:07 am

    Muy pero muy buen video Jesús!!!! Me encantó! 🙂 Un abrazo y saludos desde Uruguay!

  • Reply Daniela Argandona Lowe March 5, 2019 at 10:14 pm

    Hola Jesus 🙂 Saludos desde Uruguay, traté de hacer este efecto en una foto vertical, pero no me sale…alguna sugerencia??? Muchas gracias!

  • Reply Emma Hartley March 11, 2019 at 2:49 am

    Thank you so much – I can't wait to learn more!

  • Reply Umair Khan March 18, 2019 at 6:59 pm

    Super super super

  • Reply Norukku Theeni Talkies March 25, 2019 at 9:16 am

    wow

  • Reply Gamingwithiggy Adaywithiggy March 27, 2019 at 6:22 pm

    Awesome video man keep it up and god bless you!!!

  • Reply Melanie Lopes April 2, 2019 at 11:12 am

    Love your tutorials! Keep them coming legend!

  • Reply Freddie B April 10, 2019 at 12:28 pm

    What if you wanted to do this with a vertical picture? Great tutorial, many thanks 🙂

  • Reply PenTool Designers April 15, 2019 at 3:16 am

    Thank God i found this channel

  • Reply Suliman Algabarty May 9, 2019 at 7:25 am

    AmazinG

  • Reply Oleg Khot June 1, 2019 at 12:57 pm

    Super!

  • Reply Willy Karanja June 17, 2019 at 9:25 am

    This is really cool, am definitely trying it out, thank you

  • Reply Elhanan Aaron June 30, 2019 at 6:12 pm

    זה מסובך

  • Reply Joe Gowac July 13, 2019 at 10:26 am

    I was trying to learn how to do this with drone shots! Perfect. Can i do this effect with me in it like I’m teetering in the edge of the cliff ?

  • Reply Susie Ngamsuwan July 17, 2019 at 5:54 am

    WOW! Very impressive tutorial and visually extremely captivating. One of those rare "I-have-GOT-to-try-this" tutorials. Thanks so much, JR.

  • Reply new sign August 20, 2019 at 8:19 am

    amezing

  • Reply Srinath Rajan August 23, 2019 at 6:13 am

    Hi bro,

    How to create the curve background effects in this below link.

    https://sc01.alicdn.com/kf/HTB1O4KuFVXXXXc.XpXXq6xXFXXXy/200393376/HTB1O4KuFVXXXXc.XpXXq6xXFXXXy.jpg

  • Reply Hüseyin Kıtay August 25, 2019 at 2:43 pm

    Çok boş yapmış, sadece kafa karıştırıyor.

  • Leave a Reply